Version 7.6

• Several fixes and minor changes made for Windows Vista compatibility.
  


• Added support for several more obscure variants of TIFF files: tiled images, subsampled chroma YCbCr images, plane-separated images, plus an old type of JPEG-in-a-TIFF.
  


• When displaying multi-page files, the current page number and the total number of pages are now shown in the title bar.
  


• Image pre-caching now also works when browsing images in reverse file name order.
  

Version 7.5

• Updated & improved design of the context menus.
  


• Smarter/faster display-refresh - now only updates window regions that have been obscured.
  


• Much faster resampling (resizing) of grayscale images.
  


• Faster resampling (resizing) of color images at common zoom-factors (4x, 2x, 1/2x, 1/4x, 1/8x, 1/16x).
  


• Faster loading and display of uncompressed TIFF's (especially with very big files and with files with 16 bits/component).
  


• Added support for deflate-compressed (a.k.a. ZIP-compressed) TIFF files.
  


• New and improved design of the progress dialog.
  


• The program can now also continue a image file decode that was started, but not completed, in the "preview" window of the "Open image file" dialog. Of course, just like with previous versions, it doesn't have to re-decode an image that finished decoding and was shown in the preview either.
  


• Pre-caching of files are now disabled if the system is low on memory, or if the window is in 'frozen' mode.
  


• The "Rename file" and "Delete file" commands will now also rename or delete any associated ".iea" adjustment file.
  


• Improved behaviour on dual-monitor setups.
  


• Added a -NOREGISTRY command line option that prevents the program from reading or writing any settings in the Windows registry. This makes it possible to e.g. run it from a memory stick without leaving any traces on the host computer.
  


• Added parsing of GPS cooardinate data from JPEG/EXIF and TIFF. If available, this can be seen in the "Image" tab in the options.
  


• Dropped support for Windows 95 and NT. Also removed support for using display modes with 256 or less colors. Removal of these legacy functions serves to reduce the size of the executable, which makes the app load somewhat faster and use less memory. For the same reason 16 and 256-color versions of the menu icons are no longer included - this means that the menus wont look as good under Windows 98/ME/NT/2000 (which do not support the 32-bit icons of Windows XP and Vista).
  


• Many minor fixes and improvements.
  

Version 7.4

• Added (optional) support for SSE2 instructions for several crucial operations. E.g. zooming, adjusting colors, and decoding JPEGs are now even faster than before! (i.e. if you have a CPU that supports SSE2, i.e. an Intel Pentium 4, or an AMD Athlon 64, or later).
  


• In the viewer tab of the options dialog, you can now select a "Window background color". This is the color of the background for transparent images, and of the borders outside the image if the window is larger than the image. NB, .GIF and .PNG files sometimes contains a background color parameter, which will, if present, always (for the specific image) override the selection that you make in the options.
  


• Added new keyboard shortcuts: Ctrl + left/right arrow to mirror horizontally, Ctrl + up/down arrow to mirror vertically, Numeric +/- to zoom in (alternatives to up/down arrow).
  


• The "auto size image to window" function is now inhibited if you manually zoom into an image and it becomes larger than the screen (which is also the maximum windows size).
  


• Slide show delay times can now be set with a precision of 0.1 seconds.
  


• Fixed memory leak when displaying animated .GIF's.
  

Version 7.3

• The index View → Names selection have been replaced with four selections: "Names (1 line)", "Names (2 lines)", "Names (3 lines)" and "Names (4 lines"). This allows you to get space to see longer names.
  


• The index file name, file size, and date display is now drawn in gray in order to more easily distinguish this info from the name text drawn in black. They are also separated from the name by a few extra pixels.
  


• Changed what you can do with a mouse wheel:
  
  
  • Use the mouse wheel for scrolling vertically (like before).
    
  
  
  • Press down the wheel to drag the window instead of scrolling it.
    
  
  
  • Use left mouse-button + mouse-wheel for switching between images.
    
  
  
  • Use right mouse-button + mouse-wheel for zooming.
    
  
  
• 'Backspace' has replaced 'Shift+Space' as the short-cut key for displaying the previous image.
  


• Added support for reading 32-bit RGBA icons (.ICO).
  


• Added for reading Vista 256x256 PNG-compressed icons (.ICO).
  


• If you are running under Windows XP then buttons and other controls will now use the rounder and more colorful 'XP style'.
  


• The program manual is now in 'HTML help' format (it now both looks better and is easier to use than when it was using the older 'WinHelp' format).
  


• Plus, several smaller improvements and bug-fixes.
  

Version 7.2

• Added a "Save index as bitmap" command to the index window. This allows you to save a .bmp file with all of the index icons - can be useful as an image overview map.
  


• Added "Next/Prev image" and "Load new..." commands when you right-click on an image in 'freeze mode'. These zooms a new frozen image to fit inside the frame of the previous frozen image. Similarly new "Zoom in/out" commands (in the same menu) allows you to zoom a frozen image without changing the image frame (i.e. it clips the borders if zooming in, or adds black bars if zooming out).
  


• The Home / End keys now switch to the first / last image in the current directory.
  


• The "Save as" command now applies image adjustments (if any) to the saved image ("what you see is what you save").
  


• Minor bug fixes & improvements.
  

Version 7.1

• The "Image adjustment dialog" (previously named the "Color adjustment dialog") is now non-destructive, i.e. if you re-open the dialog after previously having made some adjustments, you'll see that the adjustment sliders are in the position where you left them. And the "Reset" button will now always bring back the original image.
  


• Add a "Save" button to the image adjustments dialog. This creates an ".iea" file that stores the settings so that the next time you load the image file, they are automatically re-applied. This allows adjustments to be remembered without having to actually edit the image file. NB, if you want to delete the adjustments file, just hit the "Reset" button.
  


• Added image rotation and mirroring options to the image adjustments dialog. The main point of this is that you can save them together with the other adjustments in the new ".iea" files.
  


• Add support for Windows links (.lnk files) that links to image files (in both the index and the viewer).
  


• Added support for reading TIFF images using JPEG compression. It primarily supports the new "compression type 7" but many (if not all) of the deprecated "compression type 6" files can also be read.
  


• Added the "F" key as short-cut for displaying the "image file information" page (this has also added this to the file menu).
  


• Added a "-zoom=<factor>" command line option.
  


• Images with transparency are now composited upon a white background in the viewer.
  


• Clicking on an index cache file (".iei", normally a hidden file) will now open the index for the directory. Similarly clicking on one of the new adjustment files (".iea", also normally hidden) will open the image that the adjustments refer to.
  


• A number of minor bug fixes and improvements.
  

Version 7.0

• The biggest change in this version is that it can now be used for free! There's no time limit and no functionality limitations in the unregistered version! So feel free to give it too all your friends! However, there is a 'nag box' when you start it that is only removed if you pay a small fee to register it.
  


• Improved the graphical design of the program menu and of the color adjustment dialog.
  


• Languages are now handled differently. Now select the 'interface language' in the Options dialog, i.e. separate compiles for different languages is no longer necessary. You can add new languages by adding '.language' file. This is simple text file containing a 'dictionary'.
  


• Many of the 'control-letter' keyboard short-cuts have been replaces by 'single-key' shortcuts.
  


• Added a 'gamma control' slider to the color adjustments dialog.
  


• If an image orientation parameter is stored in a TIFF file or a JPEG file with EXIF extensions (as saved by many digital cameras with built in 'orientation sensors'), then the image is now automatically rotated for correct viewing when you open it.
  


• New index option: 'Close index window when opening an image'.
  


• New index option: 'Monitor directory for new or changed files'.
  


• Added support for displaying YCbCr format '.raw' files.
  


• The normal 'arrow keys' is no longer used for scrolling. That is now done with the numeric key-pad keys instead (and you can now scroll in the diagonal directions using the '7912' keys' - and center with the '5' key). The normal 'up-down' arrow keys now zooms in/out. The 'left-right' arrow keys rotate the image.
  


• The 'folder view style' (details view, icon view, et c) of the file open dialog box is now remembered.
  


• The 'auto size to window' function is now temporarily disabled when you manually zoom into an image (so that you can manually zoom to larger than the screen size, even if this option is enabled).
  


• Various bug-fixes and improvements.
  

Version 6.2

• Added support for reading JPEG 2000 files (.JP2, .JPC). This new format is based on advanced wavelet compression techniques. It compresses at least 2x as much as the 'old' JPEG for the same subjective image quality. It is also more error resilient, it is better at 'progressive decoding', and it provides better control over the compression factor. Note: You can use our software Any Image (v3.2 or later) to write JPEG 2000 files.
  


• Improved the resampling (resizing) algorithm.
  


• In maximized viewer mode, the program is now minimized if you change to another active window (e.g. by pressing Alt-Tab).
  


• When using the command 'Recurse sub-directories' in an index window, the icons are now displayed unsorted. If you want them sorted you can always select a sort order in the View menu (if you have extremely many files it can take quite a while to sort them, thus this change...).
  


• Fixed a bug with the printing of larger images.
  


• .PNM is now recognized as an alternate extension for .PGM, .PGM and .PPM files.
  


• Fixed a problem with reading of some strangely formatted .PBM files.
  


• Fixed bug that could cause the program to crash when reading 24- and 32-bit .RAS files.
  

Version 6.1

• Added support for reading DirectDraw Surfaces (.DDS files).
  


• Added support for reading TIFF's and PSD's with 16-bits/pixel/color component.
  


• When using the 'Next image' command on the last image file in a directory, or the 'Prev image' command on the first image file, then it now beeps (as before) then wraps to show the first or last image file respectively.
  


• The 'Slideshow...' command is now called 'Create slideshow script' and is located in a 'Slideshow' sub-menu, together with a new option 'Run in fullscreen mode' (which is what earlier versions has always done, but if you now uncheck it, it'll run in a window instead...).
  


• Windows icon and cursor files (.ICO and .CUR) are now shown with transparency in the index - and with a white background in the viewer.
  


• Various minor bug-fixes.
  

Version 6.0

• Viewer window improvements:
  
  
  • Added support for displaying animated GIF files.
    
  
  
  • Added support for reading and viewing multi-page TIFF's (switch page with the next/prev image commands).
    
  
  
  • Added a 'Hue' color control slider in the color adjustment dialog. Also, the 'invert colors' command has been moved to this dialog.
    
  
  
  • The Next/Prev image file commands now skips bad and corrupted files.
    
  
  
  • Added 'Copy file', 'Move file' and 'Erase file' commands to the file menu.
    
  
  
  • The new 'Erase file' command will wipe the file contents three times with random data before it is deleted (not moved to the recycle bin) in order to make it much more difficult to 'undelete'. It will also rename it three times first in order to attempt to wipe the original name from the file directory tables.
    
  
  
  • It is now more responsive to user input under some circumstances when using stuff over 'slow' media (floppy disks, network connections et c).
    
  
  
  • Window borders (when the window is larger than the image) is now drawn in the 'background color' that may be specified in GIF and PNG's.
    
  
  
• Index window improvements:
  
  
  • Alpha-blending and transparency is now used when drawing icons (note: only on Windows 98 or 2000 or later).
    
  
  
  • Improved the scrolling - scrolls faster and with less flickering.
    
  
  
  • There's now a 'Save options in cache file' toggle under 'cache' in the context menu. When enabled, all of the index options (icon sizes, what info to show, et c), plus the window size, is stored in the index cache file for the directory and are restored the next time it is read. This allows you to set special options certain directories.
    
  
  
  • A 'View' submenu in the context menu replaces the options in the 'Index properties' dialog for selecting what file info to show.
    
  
  
  • Added a 'File' sub-menu to context menu. It contains commands for copying, moving, renaming, deleting and erasing the file.
    
  
  
  • The index window now detects when a file is copied, moved, deleted or renamed in the Windows Explorer and 'recreates' itself when that happens.
    
  
  
  • When you drop files from the Explorer, they are now copied to the index directory, and the index is updated accordingly.
    
  
  
  • Added a 'Recurse sub-directories' command.
    
  
  
  • After doing a 'recurse subdirectories', you'll also have the added option of sorting icons 'by full path'.
    
  
  
  • Directories are now sorted first -except when in 'recurse subdirectory' and sorting 'by full path' where each directory instead is placed at the start of the icons that it contains.
    
  
  
  • Added an 'Add all files to Any Image' command.
    
  
  
  • You can now select a 'foreground color' (used for the icon buttons).
    
  
  
  • The last sort order is now remembered.
    
  
  
  • Cache files are now saved using a background thread.
    
  
  
  • Added several new or alternate keyboard short-cuts.
    
  
  
  • Fixed a bug with the index not displaying the complete name of directories with a dot in the name when file extension display is off.
    
  
  
  • Fixed problem with not always getting long file names in the title bar under some Windows versions.
    
  
  
• Further changes and improvements:
  
  
  • In the file open dialog, the last file opened is now selected and the list is scrolled so that it is visible.
    
  
  
  • There's now a 'File type associations' list in the program properties dialog that allows you to easily turn on and off individual file type associations.
    
  
  
  • Alpha blending and transparency is now used when previewing images in the open file dialog (note: only on Windows 98 or 2000 or later).
    
  
  
  • The 'Raw image file' dialog is gone, to open a raw image file you now need to create a text file with a .RAW extension, and containing the required information for reading the file (see the Image Eye help file for more information).
    
  
  
  • The progress dialog now does not steal the keyboard focus. It also considers the position of the 'Start bar' so that it is not obscured.
    
  
  
  • Some general speed improvements.
    
  
  
  • Fixed a few minor bugs and issues.
    
  
  

Version 5.6

• The 'Next/Prev image' commands are now faster at finding the requested file when there are very many files in a directory.
  


• It now also handles sorting of international characters by using Windows 'language aware' functions.
  


• Added support for reading CALS (Computer Aided Acquisition and Logistics Support) type I files (.CAL, .CALS, .RAS).
  


• Added an 'Only shrink' option that modifies the behavior of the 'Auto size image to window' function so that it only scales down images and never scales up them.
  


• Added an option to turn on or off the file names in the index.
  


• Added a 'Print image...' command when right-clicking on image icons in the index.
  


• Added pixel density to the image info tab for some formats.
  


• Added support for reading some info from the EXIF JPEG extension (used by digital cameras).
  


• Rotating in maximized mode now keeps the window in maximized mode and is also 'smart' with respect to the 'auto size' and 'shrink large' options.
  


• Added support for Group 3/4 fax-compressed sub-format TIFF files with a 'reverse bit-ordering' (this is an unusual format that was previously displayed incorrectly).
  


• Fixed a problem with crashing on some corrupted PhotoShop extension blocks inside JPEG files.
  


• Fixed a problem with some very rare GIF files.
  


• Added a 48x48 icon for Windows XP.
  

Version 5.5

• Added some smart caching and background preloading of images. This can make image loading 'subjectively' appear as considerably faster when you're going back and forth between images in a directory.
  


• Added support for reading different kinds of text information from file formats that supports it in any standardized manner. These texts, and more info are found in a new scrollable 'list' in the 'properties' → 'image' dialog.
  


• Added an 'Add to Any Image' command (in the viewer and in the index). This allows you to easily send an image file to our dedicated image converter application, Any Image. You need to have Any Image v1.5 (or later) installed for this to work.
  


• During a slide show, the 'pause' key can now be used to pause it. Press any other key to continue again.
  


• You can now hold down the mouse wheel 'button' and scroll it to browse images.
  


• When you right click on an icon in index mode and select properties, some info about the file is now shown in the 'image' tab.
  


• Zoom in is now done in steps of 25% of the original size rather than 2x. Similarly for zoom out. What's more, the 'center of view' is now preserved while zooming.
  


• Added a 'Zoom 2x heuristic' command (on the View menu). It uses a special heuristic algorithm to double the image size. Which one's best, the normal filtered zoom or this new one, depends on the image and your personal taste. The heuristic one is can give much sharper results, but it is also usually much more ´'blocky and pixilated'.
  


• Added an option to the Index to show the number of images in the directory in the title bar.
  


• Fixed a JPEG decoding bug on non-MMX CPUs when using the 'fast IDCT' option.
  Also fixed another JPEG decoding debug that crashed it on some very uncommon images.
  


• Removed support for saving GIF and RAW files. The same functionality, and much more is now provided by the above mentioned integration with Any Image.
  This keeps the EXE file size small - so that it loads fast and don't use up needlessly use up memory!
  


• There have also been many 'invisible' changes 'under the hood' - the entire image handling functionality has been cleaned up, improved, and isolated in a generic image-handling library called EyeC++. This library is used both in Image Eye and in Any Image. It will also be made available to other developers in the form of a commercial SDK.
  

Version 5.1

• Added an optional image preview window to the file open dialog.
  


• Improved the 'Sharpness' adjustment algorithm (better edge sharpening, and less prone to enhance noise). It will now also work on palette images although the result is still best on 24-bit images.
  


• Added a 'freeze window' command to the view submenu. The idea is that when you put the image window into 'freeze' mode, it will lock itself into its current position on the desktop (with no menu bars or anything) and the only thing you can do with it is right click on it to bring up a menu with the commands 'unfreeze' and 'close'. If you shut down Windows without manually closing such a frozen window, it will automatically load again in the exact same position when you next restart Windows. Just to give an example of what you could use this for, you could place 'fixed' photographs of near and dear ones on your desktop.
  


• Added a 'topmost' toggle to the view menu, which you can use to force an image window to stay on top of all other non-topmost windows.
  


• Added '-topmost' and '-freeze' command line switches.
  


• When the cursor does not indicate 'scroll mode', you can now move a window not only by dragging it with the mouse but also by using the arrow keys. Also, the Alt keys have now replaced the Control keys as 'scroll mode override'.
  


• Added a rename file command to the image windows file menu.
  


• Added an index option to show file extensions.
  


• Clicking on a directory in the index view now replaces the current index window with the new one instead adding another one. If you want to keep the current window, use 'Spawn new...' on the context menu instead, go to the new directory, and click the 'Index' button. Also, all root directories will now show driver letters (if 'show directories' is turned on) so that you can easily change drive from there. And the 'up' directory now has an icon…
  


• Index icons are now never enlarged, i.e. very small images are drawn with 'borders' on all sides.
  


• Added a 'delete script file when finished' option to the slideshow dialog.
  


• The zoom state is now kept when rotating.
  


• Added support for saving 2 and 16 color BMP files in addition to the 256- and 16M-color files supported by previous versions. Minimum color depth is automatically selected when saving an image in order to minimize the file size.
  

Version 5.0

• Added MMX instruction set support! Mainly for JPEG decoding (which can now be up to 25% faster - disc access times not counted) but also for a few other things (e.g. 40% faster resampling of an image). It will of course still work on non-MMX processors just as before.
  


• A new option (on by default) hides the window title bar whenever the mouse is not on top of an image window.
  


• Clicking and dragging an image when a 'scroll cursor' is not visible will now move the whole window (when the scroll cursor is on, you can hold down Control key and drag it).
  


• The Contrast and Brightness controls now preserves the color balance. This is different than how almost all other app does it - but hopefully you'll actually like this way better!
  


• Improved down sampling algorithm (i.e. 'shrinking' images now gives much better results).
  


• Added an option to display the image name on top of the image (in various selectable positions).
  


• Added a 'Recent directories' quick selection to the file open dialog.
  


• Added a slight 'texture' to the dialog backgrounds.
  


• Added support for reading CMYK format JPEG's, TIFF's and PSD's as well as YCCK format JPEG's.
  


• There's a new 'How to register' info box to help unregistered users.
  


• Added a 'Rename' command in index mode.
  


• Added support for IntelliMouse Explorer 'X mouse' forwards/backwards buttons for switching between images.
  


• Added a 'Rotate 180°' command as well as two new keyboard shortcuts: Ctrl-Left = Rotate 90°, Ctrl-Right = Rotate 270°
  


• Added 'Zoom in 2x' and 'Zoom out 2x' commands. Keyboard shortcuts are Ctrl-Up/Down.
  


• New 'spawn next/previous image' commands open the next or previous image in a new window. These have keyboard shortcuts Ctrl-PgUp / PgDn or, if you prefer, Ctrl-Space / Ctrl-Shift-Space. Similarly you can now use Space / Shift-Space to display the next / previous image as alternatives to PgDn / PgDn.
  


• More new keyboard commands: Tab / Shift-Tab moves between all opened Image Eye image windows.
  


• Removed the 'video mode' menu - because it made the right mouse button menu so slow to appear. It has been replaced with a shortcut to the Windows display properties dialog (which provides the same functionality) on the view sub-menu.
  

Version 4.2

• Added a 'Send window to back' function (shortcut: Ctrl-B).
  


• Improved the 24 to 8 bit color conversion so that it now uses 8 bits/per component (earlier versions used 6 bit precision) to calculate the color lookup table for the final 8-bit palletized image. This gets rid of the problem where, in a 24-bit video mode, you sometimes could take a screenshot of a normal gray dialog-box or something, save it as an 8-bit GIF and it turned up all dithered and (slightly) ugly!
  


• Fixed a bug with not always uninstalling correctly from directories with a space in the path name.
  


• Fixed bug with clicking on directories boxes in the index window not working.
  


• Fixed a bug with the next/prev image function not working under certain conditions when started with an image file from the command line.
  


• Fixed a bug with some very large TIFF-files.
  

Version 4.1

• When loading an image, it now tries to ensure that the lower right part is not outside the screen if not necessary.
  


• Fixed a bug with compressed TGA files.
  


• Fixed bug with the index not working on directories with a dot in their name.
  


• Fixed problem with parts of the adjust colors dialog sometimes appearing behind the taskbar.
  


• Added a 'Reload from file' function.
  

Version 4.0

• Added an installation program (setup.exe).
  


• Added a bunch of new command line options:
  
  
  • -onlyone Close any previous instance before display the new image
    
  
  
  • -close Close all Image Eye instances
    
  
  
  • -fullscreen Start in 'Full screen' mode
    
  
  
  • -fitvideo Automatically fit video mode (combined with -fullscreen)
    
  
  
  • -title=text Set the window title to 'text'
    
  
  
  • -pos=x,y Show the window at screen coordinates x,y
    
  
  
  • -index Show index for supplied directory
    
  
  
  • -slide Create and show a slideshow for supplied directory
    
  
  
• Added support for reading PhotoShop (.PSD) files (Grayscale, Indexed, Duotone and RGB, 8bits/component modes only).
  


• Added support for reading raw image files (.RAW). This pops up a dialog where you enter the necessary parameters. Added support for writing raw interleaved RGB files.
  


• Added a 'Create slideshow script' options dialog (appears when you select the Slideshow command from the Viewer or from the Index).
  


• Added 'Hide progress bar' and display 'Full file path' options to the Viewer properties.
  


• Added a 'Show full directory path in title bar' option and a 'Background color' button to the Index properties.
  

Version 3.9

• Added a 'Paste from clipboard' command.
  


• Added a 'Trim image to window' command to the view menu. (it is only available when the window is smaller than the image).
  


• Added a bunch of keyboard shortcuts for common commands (see the viewer and index command sections of the help file). Examples: Ctrl-W (size image to window) and Ctrl-I (size window to image).
  


• Added a 'Close all image windows' command (Shortcut: Ctrl-Alt-X).
  


• Added a 'Delete this & show next' function (Shortcut: Ctrl-X).
  


• The index now uses the default GUI font - which hopefully should make filenames containing e.g. Japanese multi-byte characters display better.
  


• Fixed bug with not removing the files during an uninstall.
  


• Now restores the original video mode upon exit (if you had changed it from within Image Eye).
  

Version 3.8

• Added a Display → 'Fit to image' command that automatically selects the video mode with the best resolution for viewing an image (it wont change the bit depth though, as that would be much slower...).
  


• Added an 'Auto fit video mode' option. Also added an 'Auto shrink when too large' option. These two only work when the window is maximized (as they make most sense then).
  


• Added an 'Automatically create cache files' option for the index.
  


• Added 'capture a screen shot' and 'capture a window shot' commands to the viewer → File submenu.
  


• Added a 'sharpness' slider in the 'adjust colors' dialog (for technical reasons, this control is only enabled when viewing true-color images in true-color video modes).
  


• Removed the 'preview' button from the 'adjust colors' dialog and added a 'reset' button in its stead. Preview is now done automatically whenever you release one of the sliders!
  


• Add a 'show negative' command to the view menu that 'inverts' all colors. This can be usefull for picking out details when viewing deep-sky photographs, or if you actually have negative photographs...
  


• Add 'set AutoSizeImage On/Off' and 'set AutoVideoMode On/Off' commands to the slide show scripting language.
  

Version 3.7

• Windows 3.1/Win32s support has (finally) been dropped. This was necessary because I have switched to a newer compiler which has no Win32s support. W3.1 users should continue using Image Eye v3.6!
  


• The program now loads slightly faster!
  


• Added an 'Adjust colors' command to the View menu. As the name implies it lets you adjust the color of the image - using the following parameter set: contrast, brightness, color saturation, overall intensity, red-, green-, and blue-component intensities.
  


• Added 'zoom' commands to the View menu which let you zoom the image to 50, 75, 100, 150, 200, 300, or 400% of its original size.
  


• Added mouse wheel support for the index window.
  


• Fixed yet another bug with some kinds of TIFF files.
  

Version 3.6

• Added a file date display option for the index window properties.
  


• Added commands to sort the icons in the index window by name, file size, file date, or image size.
  


• The Next/Previous image file command in the image window now skips any files of zero size (typical of interrupted internet downloads) as well as when encountering other 'bad' files.
  


• The 'autosize image' option now leaves the last image in place until the new, resampled, image has been calculated.
  


• Fixed a 'sort-of-bug' with hanging when reading some strange GIF files having larger 'local image size' than 'global image size'.
  


• Fixed a problem with some uncompressed TIFF files.
  

Version 3.5

• The index 'thumbnail' images can now be cached on disk for faster display (this feature works best in true-color mode). You manage the cache manually by using 'Save cache', 'Update cache' or 'Remove cache' from the index window's context menu. The cache is never created automatically which means your disk will not be filled with Image Eye Index cache files where you do not want them. The cache files (ImageEye.iei) can optionally be compressed reducing the disk space usage (typically by about 20%).
  


• Added a 'Delete file' command to the context menu for the icons in the index window.
  


• Added .GIF file format export.
  


• The space bar now has the same function as the PgDn key in the viewer (i.e. display next image in the current directory).
  


• Fixed bug with hanging on reading many 'animated' (multi-image) GIF's.
  

Version 3.3

• Added support for 'progressive scan' JPEG files. The JPEG decoder is also slightly faster for 'normal' JPEG files due to a more effective use of the CPU cache.
  


• Added a 'Display' submenu top the right mouse button image menu so you can easily change video mode (if you have Win98 or NT4 then you should also be able to select color bit depth).
  


• Added 'Rotate image +90°', 'Rotate image -90°', 'Mirror image vertically' and 'Mirror image horizontally' commands to the view submenu.
  


• Added 'mouse wheel' support for vertically scrolling images (req. Win98 or NT4 and a Msft Mouse 2 or similar to work).
  


• Added a 'Slideshow' command to the right mouse button menu (for both the viewer and the index windows). It creates and runs a slideshow script for all the images in the current directory.
  


• Fixed problem with not always receiving the 'long file name' when launching images from e.g. the Explorer (which also made the next/previous image command fail when started with a 'short' file name).
  


• Fixed a bug with the slide show script 'delay key' command.
  

Version 3.2

• Much more 'forgiving' when reading corrupted GIF's and JPEG's: In other words it should no longer crash as often if you e.g. try to read a GIF that you started downloading from the net but interrupted before the whole image was finished...
  


• For the astronomers out there, I have added FITS support (Flexible Image Transport System v1.1, .FIT files).
  


• Added support for TIFF images using CCITT Group 3 (T.4) or Group 4 (T.6) fax compression.
  


• Added support for 16bit and 32bit .BMP files.
  


• Now uses the Windows shell for the file → delete command which means that deleted files end up in the recycle bin.
  


• No longer associates .ICO or .CUR files with Image Eye since Windows built in 'live icons' are better (you can still open them explicitly using the open file dialog).
  


• Killed a handful of bugs.
  

Version 3.1

• This is the first officially promoted release of Image Eye.
  


• Removed the 'nag box' from the unregistered versions (it was a little too cruel...) - instead the text 'unregistered' is painted in the upper left corner of images and the software will disable itself after 30 days of use. The slide show feature is now also available in the unregistered version.
  


• Added view → Next image file / view → Previous image file (also accessible through the PgUp / PgDn keys) to quickly view the (alphabetically) next / previous image in the current directory.
  


• Added 'optional' support for .FIF files - Fractal Image Files. To enable it, you must have installed Iterated Systems free 32bit decoder library; Deco_32.dll version 6.0 or later. This file can downloaded from my www site.
  


• Image files must now have the correct file extension to be recognized by the index feature. The previous version tried to determine if it was an image file even if it had an incorrect extension. However, some file types simply were not constructed in such a way that they can be 100% reliably detected which sometimes caused the index feature to load a non-image file as some image file type, which in turn could make it crash...
  


• The first time the program is installed, it now asks if it should associate file types with itself. There's also a little checkbox that you can use to toggle all file associations on or off.
  


• Added new slide show script command "delay key" to wait for a keypress.
  


• Fixed a bug with missalignment of some 4bit .BMP files.
  


• Fixed a bug that made it crash on a few .GIF files.
  


• Fixed a serious bug in the printing code.
  


• Added the option to measure the time it takes to load an image - for comparing performance with other viewers...
  


• Licensed the LZW algorithm used in GIF and TIFF files from Unisys.
  

Version 3.0

• First 32-bit Windows release.
  

Version 2.1

Last of the (by now long forgotten) DOS versions.